The accretion environment of Supergiant Fast X-ray Transients probed with XMM-Newton

Supergiant fast X-ray transients (SFXTs) are characterized by a remarkable variability in the X-ray domain, widely ascribed to the accretion from a clumpy stellar wind. In this paper we performed a systematic and homogeneous analysis of sufficiently bright X-ray flares from the SFXTs observed with XMM-Newton to probe spectral variations on timescales as short as a few hundred of seconds. Our ultimate goal is to investigate if SFXT flares and outbursts are triggered by the presence of clumps and eventually reveal whether strongly or mildly dense clumps are required. For all sources, we employ a technique developed by our group, making use of an adaptive rebinned hardness ratio to optimally select the time intervals for the spectral extraction. A total of twelve observations performed in the direction of five SFXTs are reported. We show that both strongly and mildly dense clumps can trigger these events. In the former case, the local absorption column density may increase by a factor of >>3, while in the latter case, the increase is only by a factor of 2-3 (or lower). Overall, there seems to be no obvious correlation between the dynamic ranges in the X-ray fluxes and absorption column densities in SFXTs, with an indication that lower densities are recorded at the highest fluxes. This can be explained by the presence of accretion inhibition mechanism(s). We propose a classification of the flares/outbursts from these sources to drive future observational investigations. We suggest that the difference between the classes of flares/outbursts is related to the fact that the mechanism(s) inhibiting accretion can be overcome more easily in some sources compared to others. We also investigate the possibility that different stellar wind structures, rather than clumps, could provide the means to temporarily overcome the inhibition of accretion in SFXTs.Comment: Accepted for publication on A&

The transitional millisecond pulsar IGR J18245-2452 during its 2013 outburst at X-rays and soft gamma-rays

IGR~J18245--2452/PSR J1824--2452I is one of the rare transitional accreting millisecond X-ray pulsars, showing direct evidence of switches between states of rotation powered radio pulsations and accretion powered X-ray pulsations, dubbed transitional pulsars. IGR~J18245--2452 is the only transitional pulsar so far to have shown a full accretion episode, reaching an X-ray luminosity of $\sim10^{37}$~erg~s$^{-1}$ permitting its discovery with INTEGRAL in 2013. In this paper, we report on a detailed analysis of the data collected with the IBIS/ISGRI and the two JEM-X monitors on-board INTEGRAL at the time of the 2013 outburst. We make use of some complementary data obtained with the instruments on-board XMM-Newton and Swift in order to perform the averaged broad-band spectral analysis of the source in the energy range 0.4 -- 250~keV. We have found that this spectrum is the hardest among the accreting millisecond X-ray pulsars. We improved the ephemeris, now valid across its full outburst, and report the detection of pulsed emission up to $\sim60$ keV in both the ISGRI ($10.9 \sigma$) and Fermi/GBM ($5.9 \sigma$) bandpass. The alignment of the ISGRI and Fermi GBM 20 -- 60 keV pulse profiles are consistent at a $\sim25\ \mu$s level. We compared the pulse profiles obtained at soft X-rays with \xmm\ with the soft \gr-ray ones, and derived the pulsed fractions of the fundamental and first harmonic, as well as the time lag of the fundamental harmonic, up to $150\ \mu$s, as a function of energy. We report on a thermonuclear X-ray burst detected with \Integ, and using the properties of the previously type-I X-ray burst, we show that all these events are powered primarily by helium ignited at a depth of $y_{\rm ign} \approx 2.7\times10^8$ g cm${}^{-2}$. For such a helium burst the estimated recurrence time of $\Delta t_{\rm rec}\approx5.6$ d is in agreement with the observations.Comment: 10 pages, 6 Figures, 3 Tables Astronomy and Astrophysics Journal, accepted for publication on the 13th of April 201

Properties and observability of glitches and anti-glitches in accreting pulsars

Several glitches have been observed in young, isolated radio pulsars, while a clear detection in accretion-powered X-ray pulsars is still lacking. We use the Pizzochero snowplow model for pulsar glitches as well as starquake models to determine for the first time the expected properties of glitches in accreting pulsars and their observability. Since some accreting pulsars show accretion-induced long-term spin-up, we also investigate the possibility that anti-glitches occur in these stars. We find that glitches caused by quakes in a slow accreting neutron star are very rare and their detection extremely unlikely. On the contrary, glitches and anti-glitches caused by a transfer of angular momentum between the superfluid neutron vortices and the non-superfluid component may take place in accreting pulsars more often. We calculate the maximum jump in angular velocity of an anti-glitch and we find that it is expected to be about 1E-5 - 1E-4 rad/s. We also note that since accreting pulsars usually have rotational angular velocities lower than those of isolated glitching pulsars, both glitches and anti-glitches are expected to have long rise and recovery timescales compared to isolated glitching pulsars, with glitches and anti-glitches appearing as a simple step in angular velocity. Among accreting pulsars, we find that GX 1+4 is the best candidate for the detection of glitches with currently operating X-ray instruments and future missions such as the proposed Large Observatory for X-ray Timing (LOFT).Comment: Accepted for publication in Astronomy & Astrophysics. 6 pages. Minor changes to match the final A&A versio

Glancing through the accretion column of EXO 2030+375

We took advantage of the large collecting area and good timing capabilities of the EPIC cameras on-board XMM-Newton to investigate the accretion geometry onto the magnetized neutron star hosted in the high mass X-ray binary EXO 2030+375 during the rise of a source Type-I outburst in 2014. We carried out a timing and spectral analysis of the XMM-Newton observation as function of the neutron star spin phase. We used a phenomenological spectral continuum model comprising the required fluorescence emission lines. Two neutral absorption components are present: one covering fully the source and one only partially. The same analysis was also carried out on two Suzaku observations of the source performed during outbursts in 2007 and 2012, to search for possible spectral variations at different luminosities. The XMM-Newton data caught the source at an X-ray luminosity of $2\times10^{36}$ erg s$^{-1}$ and revealed the presence of a narrow dip-like feature in its pulse profile that was never reported before. The width of this feature corresponds to about one hundredth of the neutron star spin period. From the results of the phase-resolved spectral analysis we suggest that this feature can be ascribed to the self-obscuration of the accretion stream passing in front of the observer line of sight. We inferred from the Suzaku observation carried out in 2007 that the self-obscuration of the accretion stream might produce a significantly wider feature in the neutron star pulsed profile at higher luminosities ($\gtrsim$$2\times10^{37}$ erg s$^{-1}$).Comment: Accepted for publication on A&

Low-Cost Visual Sensor Node for BlueTooth-Based Measurement Networks

This paper proposes a wireless visual sensor comprising of a low-cost grayscale camera as the sensing hardware and a BlueTooth (BT) 100-m slave module as the transmission hardware. The latter enables the sensor to be inserted as a node in a medium-range BT measurement network. The proposed sensor, which is designed to satisfy precise specifications in terms of image-transfer rate and power consumption, represents a good image-acquisition solution in a wide range of applications where hardwiring between camera and image processor is undesired. This paper describes the hardware used and the overall operating principle behind the sensor, discusses the sensor-node performance, and reports the results of reliability tests

Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies

This paper deals with the measurement of the R, L, and C parameters of passive components in nonsinusoidal conditions. Since these components usually work with voltage and current waveforms that are different from sinusoidal ones, nonsinusoidal characterization has to be made. The importance of nonsinusoidal characterization of passive components is highlighted through the analysis of two case studies: (1) the influence of distorted waveforms on the line impedance stabilizer network (LISN) passive component behaviors and (2) the influence of voltage and current harmonics on hybrid filter responses. In this paper, the authors propose and describe a measurement method based on linear system identification and model parameter estimation techniques. Then, the two case studies are analyzed and described with the help of some test results

Performance Characterization of a Wireless Instrumentation Bus

The architecture and operation of a wireless instrumentation bus based on the Bluetooth standard are presented together with a detailed characterization. The bus, via suitable wireless interface boards, allows measurement instruments equipped with standard RS232, IEEE488, universal serial bus, and local area network interface ports to be simply connected within the wireless area without any firmware modification. In addition, a comparison with traditional wired interface buses is carried out in terms of communication reliability and throughput with reference to some basic operating modes. Finally, the results of distance tests and a detailed evaluation of power consumption for each wireless interface module are reported. This will enable measurement system designers to evaluate the convenience of the solution for their application requirements

"Hiccup" accretion in the swinging pulsar IGR J18245-2452

IGR J18245-2452 is the fifteenth discovered accreting millisecond X-ray pulsar and the first source of this class showing direct evidence for transition between accretion and rotational powered emission states. These swing provided the strongest confirmation of the pulsar recycling scenario available so far. During the two XMM-Newton observations that were carried out while the source was in outburst in April 2013, IGR J18245-2452 displayed a unique and peculiar variability of its X-ray emission. In this work, we report on a detailed analysis of the XMM- Newton data and focus in particular on the timing and spectral variability of the source. IGR J18245-2452 continuously switches between lower and higher intensity states, with typical variations in flux up to a factor of about 500 in time scales as short as few seconds. These variations in the source intensity are sometimes associated to a dramatic spectral hardening, during which the power-law photon index of the source changes from Gamma=1.7 to Gamma=0.9. The pulse profiles extracted at different count rates and energies show a complex variability. These phenomena are not usually observed in accreting millisecond X-ray pulsars, at least not on such a short time scale. Fast variability was also found in the ATCA radio observations carried out for about 6 hours during the outburst at a frequency of 5.5 and 9 GHz. We interpret the variability observed from IGR J18245-2452 in terms of a "hiccup" accretion phase, during which the accretion of material from the inner boundary of the Keplerian disk is reduced by the onset of centrifugal inhibition of accretion, possibly causing the launch of strong outflows. Changes across accretion and propeller regimes have been long predicted and reproduced by MHD simulations of accreting millisecond X-ray pulsars but never observed to produce an extreme variability as that shown by IGR J18245-2452.Comment: A&A in press. Revised versio